Labcells is a iso9001:2000
manufacturer and supplier of cells, cuvettes and accessories for
spectrophotometers, fluorometers and
possible,Trying to cut costs
without sacrificing quality or service,if you choice Labcells®
The data shows transmission characteristics of empty
cells made from different materials.(The enpty
cells:thickness1.25mm*2,including surface reflection
is a percentage of how well light
passes through the windows of acell
is measured on a scale of
can vary greatly depending on the
wavelength range being worked in and thematerial
or vial is made from.
The Z dimension is the height from the bottom of the cell to
the center of its sample chamber.In case of using a small volume cell in a
spectrophotometer or fluorimeter, the Z dimension of the cell should be
the same as the height of the instrument’s light beam. The height of the
light beam is usually 8.5mm or 15mm,20mm, depending oh the manufacturer.
When ordering a cell which has more than one Z dimension available, it is
necessary to specify the required Z dimension.
is the distant between the interior
polished walls of acuvette
. Lightpaths are measured in
millimeters and can vary from 0.5 mm up to 200 mm. The most
in use today is 10 mm. Most
manufacturers provide a standard 10 mm rectangularcuvette
holder with their machines, however
this should be confirmed with the manufacturer because not all machines
may be able to support a 10 mm holder.
This site contains
information on the product information for reference purposes only . The
information on this website is not legally binding.Reserves the right to
change the technical parameters and effectiveness of the rights and any
other information .